VADDIO WALLVIEW PRO EAGLEEYE Manuel d'utilisateur télécharger pdf (Page 14)

Call 800-572-2011

Toll Free

vaddio.com

Quick-Connect CCU Systems

The ﬁrst Camera Control Unit for Robotic PTZ Cameras, the Vaddio Quick-Connect CCU enables you to adjust IRIS,

GAIN, COLOR and DETAIL with the turn of a knob. And install is easy, too. Just use standard Cat. 5 cabling to run

HD/SD video, power, SYNC and camera control up to 500 feet from your control room.

QUICK-CONNECT CCU

You can finally take control of a PTZ Camera’s image output. Match

multiple cameras and make necessary changes to IRIS, GAIN, COLOR

and DETAIL easily. In addition, there are two Scene store buttons, allowing

the user to save speciﬁc color-matched images, such as day & night,

lighting changes or multi locations.

Tally indicators are located on the front of each Quick-Connect CCU,

allowing the user to obtain a visual indicator of a live camera. Furthermore,

with the Sony® BRC series cameras, the LED tally light built into the

camera also illuminates, providing the on-air talent a visual indicator of

which camera is live.

The Quick-Connect CCU’s cabling system allows the integrator to use

standard Cat. 5 cabling to run both HD and SD video, camera power,

black burst sync and camera control up to 500 feet. Vaddio’s High Speed

Differential Signaling™ (HSDS) provides a high-bandwidth, low-loss video

signal to ensure high deﬁnition quality up to 500

′

(152.4 m).

Individual camera video signal calibration can be achieved by using the

user-controllable Y-Gain potentiometer for adjusting luminance gain

over the entire cable distance, along with the 4-Position skew switch to

compensate for signal loss over the cable distance.

The Quick-Connect CCU supports the Sony BRC-Z700, BRC-H700

and BRC-300. It also supports the Sony EVI-HD1, EVI-D70 and the

EVI

D100.

WallVIEW CC

Z700 System

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Pas de commentaire

VADDIO WALLVIEW PRO EAGLEEYE Manuel d'utilisateur Page 14