Vaddio WideSHOT WallVIEW USB Manuel d'utilisateur télécharger pdf (Page 7)

WideSHOT WallVIEW USB System

WideSHOT WallVIEW USB Document Number 342-0696 Rev. B Page 7 of 44

Rear Panel Connections with Feature Call-outs

Image: WideSHOT HD Camera Rear View

1) RS-232 & IR O

ut: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR

signaling received by the front IR receiver, which can be transmitted to third party devices. The WideSHOT will

not react to the remote if the IR is off. IR forwarding is only available in the SR Quick-Connect models.

2) EZ Power/Video Port:

This RJ-45 connector is only used with the Quick-Connect SR, Quick-Connect DVI-D/HDMI SR Interface, Quick-

Connect USB and USB Mini Interfaces to supply power and return HSDS (differential) video from the camera

over Cat-5 cable up to distance of 150’ (45.72m).

3) WideSHOT Dip Switch Settings:

Settings for IR remote frequency, IR receiver on/off, image flip, test bars and defaults can be configured on these

switches. See the Switch Settings page for additional information. The dip switch settings are as follows:

Table: WideSHOT Dip Switch Settings

4) HD Video Select:

A rotary switch allo

ws the user to choose the component HD output video resolution and format. After setting or

changing the resolution, reboot the camera to ensure proper operation. If an unassigned rotary selection position

is chosen (3, 9, A, B, C or D), the camera will output a medium grey video privacy mask. Simply set the rotary

switch to an assigned position to output video. The HD Video Select Rotary Switch Settings are as follows:

Table: WideSHOT HD VIDEO Selections

Dip Switch Function

1 Up = IR1, Down = IR2

2 Up = IR 1 or 2, Down = IR3

3 Up=IR ON, Down = IR OFF

4 Up = Normal Image, Down = Image Flip

5 Test Bars

6 Update Position - Leave UP unless updating firmware

All Down Reset to Defaults - with power cycle

Rotary

Resolutions

Rotary

Resolutions

720p/59.94 8

576p/50

1 1080i/59.94 9 --

2 1080p/59.94 A --

3 -- B --

4 720p/50 C --

5 1080i/50 D --

6 1080p/50 E 1080p/29.97

7 480p/59.94 F 1080p/25

①

②

③

④

Notes:

1) For IP or USB 2.0 Streaming, use

position “0” (720p/59.94) for best

results

2) Set the rotary switch to an assigned

position. A medium grey privacy mask

is displayed on unassigned positions.

Point the notch in

the switch stem to

assign the rotary

position

6 - Position

Dip Switch

1 2 3 4 5 6 7 8 9 10 11 12 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Vaddio WideSHOT WallVIEW USB Manuel d'utilisateur Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Audio Vaddio WideSHOT WallVIEW USB